Full - Wheel Well Water Tank
Vanovation Wheel Well Fresh Water Tank (32Gal / 120L)
Locally Manufactured in BC, Canada!
48”L x 16”W x 16”H
*Please note the Passenger Side tank is pictured; tank pushes up against van wall with fitting (holes) at back of van.
**PICTURED FITTINGS ARE NOT ACCURATE - PLEASE REFER TO DRAWINGS FOR NEW FITTING LAYOUT.
Vanovation Wheel Well Fresh Water Tank (32Gal / 120L)
Locally Manufactured in BC, Canada!
48”L x 16”W x 16”H
*Please note the Passenger Side tank is pictured; tank pushes up against van wall with fitting (holes) at back of van.
**PICTURED FITTINGS ARE NOT ACCURATE - PLEASE REFER TO DRAWINGS FOR NEW FITTING LAYOUT.
Vanovation Wheel Well Fresh Water Tank (32Gal / 120L)
Locally Manufactured in BC, Canada!
48”L x 16”W x 16”H
*Please note the Passenger Side tank is pictured; tank pushes up against van wall with fitting (holes) at back of van.
**PICTURED FITTINGS ARE NOT ACCURATE - PLEASE REFER TO DRAWINGS FOR NEW FITTING LAYOUT.
And we do mean “Tank” this thing is Certified “BEEFY” with extra thick wall construction. Locally Manufactured in BC, Canada!
Perfect for Transit | Sprinter. Raise tank by 2.5" for ProMaster (48"x16"x16").
Polyethylene. Food grade CSA approved and BPA free.
DRAWINGS (open in new window):
OPTIONAL FITTINGS KIT INCLUDES:
2pc Nylon 1/2” MIP to 1/2” Hose Barb (Elbow)
2pc Nylon 1/2” MIP to 1/2” Hose Barb (Straight)
1pc Nylon 1” MIP to 1-1/4” Hose Barb (Straight) - For Gravity Style Fill e.g. Valterra
1pc Nylon 1” MIP to 1/2” Hose Barb (Straight)
1pc Nylon 1/2” Hose Barb Tee
1pc Nylon 1/2” MIP to Hose Barb Tee
2pc Nylon 1/2” Plug
2pc Teflon Tape
20ft - 1/2” Premium Braided Hose
15pc Gear Clamp (1/2”) Extended Band Type.
2pc Gear Clamp (1-1/4”) Extended Band Type.
2pc PVC Ball Valve (1/2” FIP)
Our nylon fittings are made with FDA approved high-quality first-generation resin and are NSF 61 certified. They are generally acceptable for use at working pressures up to 150 psi and will withstand temperatures as high as 75°C (167°F) and as low as -40°C (-40°F) although they should not be used below 0°C (32°F) where fluid expansion from freezing can occur. Nylon is a strong, abrasion-resistant material with excellent impact resistance. Nylon has good chemical resistance to organic solvents, oils, and fuels but is not recommended for use with strong acids and bases such as ammonium, boric acid, calcium, or sulfuric acid.
**We do not accept returns on this item.
